, 15.01.2022 09:40 firefightergros7271

# GIVING BRAINLIEST How does a wireless LAN establish its physical boundaries? A. It uses radio waves to create a general range for the network. B. It automatically sets up a network that is 30 miles in circumference. C. It automatically sets up a network that is 30 miles in diameter. D. It determines the size of the network based on the number of users that will be connecting to the network.

### Another question on Computers and Technology

Computers and Technology, 22.06.2019 05:10
Suppose we have a byte addressable computer that has a 32-byte cache with 8 bytes per block. the memory address is 8 bits long. the system accesses memory addresses (in hex) in this exact order: 6e, b9, 17, e0, 4e, 4f, 50, 91, a8, ab, ad, 93, and 94. (a) assuming the cache is direct mapped, what memory addresses will be in cache block 2 after the last address has been accessed? (b) assuming the cache is direct mapped, what is the hit ratio for the entire memory reference sequence given, assuming the cache is initially empty? (c) assuming the cache is 2-way set associative with a lru replacement policy, what is the hit ratio?
Computers and Technology, 23.06.2019 04:00
Laire writes a letter to her grandmother, in which she describes an amusement park she visited last week. she adds pictures of that place in her letter. which feature of a word processing program will claire to remove unwanted parts of the pictures?
Computers and Technology, 23.06.2019 09:30
:you areto design the controller for alight that functions both as an ordinary light and also as a motion activated light and alarm. a.if the manual switch s is on, then the light l is on. b.besides the manual switch, there is a motion detector, m1, which activatesthis light.c.if motion is detected but the light is on anyway because s is on, only then a secondoutput a, an alarm, is turned on. d.the disable switch, d, disables the motion activated light and alarmbut leaves manual control operation of the light using switch s.(i)read the problem statement and clearly identify the inputs and outputs for the circuit you are designing. (ii)create the truth table for this system; include the light, alarm, switch, disable, and the motion sensor.(iii)draw a schematic of this system.