subject
Engineering, 08.11.2019 05:31 door9817

Arow of rectangular baffle blocks (0.4m high, 0.6m wide and 1.0m long) are to be installed in a 12m wide stilling basin to aid energy dissipation after a dam spillway. the blocks are spaced uniformly 0.4m apart across the spillway exit. the drag force d in each block is given by d = 0.5cd\small \rhov 2afb, with afb as the frontal area of the block and cd as the effective drag coefficient = 0.25 and v as the upstream velocity. if the flow rate is 150m3 /s and the upstream depth is 2m, determine the downstream water depth and energy loss for the two cases;

(a) blocks not installed (energy dissipated as a hydraulic jump downstream)

(b) blocks installed (momentum theory, considering drag forces)

(c) summarize a comparison between both scenarios

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.
Answers: 1
question
Engineering, 04.07.2019 18:10
Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery
Answers: 2
question
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
question
Engineering, 04.07.2019 18:20
Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above
Answers: 1
You know the right answer?
Arow of rectangular baffle blocks (0.4m high, 0.6m wide and 1.0m long) are to be installed in a 12m...
Questions
question
Chemistry, 09.01.2021 01:50
question
Computers and Technology, 09.01.2021 02:00
Questions on the website: 10321470