subject
Engineering, 08.11.2019 05:31 dria40

Arigid tank whose volume is 0.5 m3, initially containing ammonia at 20°c, 1.5 bar, is connected by a valve to a large supply line carrying ammonia at 12 bar, 200°c. the valve is opened only as long as required to fill the tank with additional ammonia, bringing the total mass of ammonia in the tank to 143.4 kg. finally, the tank holds a two-phase liquid–vapor mixture at 20°c.

determine the heat transfer to the ammonia in the tank from the surroundings, in kj, ignoring kinetic and potential energy effects.

qc. v = ?

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
question
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
question
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
question
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
You know the right answer?
Arigid tank whose volume is 0.5 m3, initially containing ammonia at 20°c, 1.5 bar, is connected by a...
Questions
question
Mathematics, 14.01.2021 01:00
question
Geography, 14.01.2021 01:00
question
English, 14.01.2021 01:00
question
History, 14.01.2021 01:00
Questions on the website: 10206960