subject
Engineering, 08.11.2019 05:31 nyctvinny8290

Apiston-cylinder assembly contains 2 lbm of water, initially at 100 lbf/in.2 and 400o
f. the water undergoes two processes in series: a constant pressure process followed by a constant volume
process. at the end of the constant volume process, the temperature is 300o
f and the water is a two-phase liquid-vapor mixture with a quality of 60%. neglect kinetic and potential energy
effects.

(a) sketch t-v and p-v diagrams showing the key states and the processes.
(b) determine the work and heat transfer for each process, all in btu.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
question
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
question
Engineering, 04.07.2019 18:20
Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.
Answers: 2
question
Engineering, 04.07.2019 19:10
Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?
Answers: 3
You know the right answer?
Apiston-cylinder assembly contains 2 lbm of water, initially at 100 lbf/in.2 and 400o
f. the w...
Questions
question
Computers and Technology, 13.07.2019 18:00
Questions on the website: 10236564