 , 08.04.2021 23:50 david7962

# Consider a situation where water is used as the coolant in a heat exchanger for a micro-electromechanical device (MEM device). The characteristic velocity is estimated to be 10 microns/s, the length scale of the system is 100 microns, and the characteristic temperature difference of the problem is 10 K. Given what you know about the system, what assumptions can you make about the flow (namely: is it viscous (diffusion)dominated or inertia (convection) dominated, is it conduction dominated or convection dominated, are viscous dissipation effects important, etc.) Answers: 1  ### Another question on Engineering Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3 Engineering, 04.07.2019 18:10
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1 Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1 Engineering, 04.07.2019 19:10
Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?
Answers: 3
You know the right answer?
Consider a situation where water is used as the coolant in a heat exchanger for a micro-electromecha...
Questions   Mathematics, 09.04.2020 13:55    Mathematics, 09.04.2020 13:56     Mathematics, 09.04.2020 13:58        Questions on the website: 11514501